ALLTRACK
AT2200
- Original Size
- 750X150X66
- Rubber Track Size
- 750X150X66
- Rollers
- A2
- Alternative Size
- -
Rubber Track Size
750X150X66 Rubber Track
750X150X66 rubber track size page with fitment records, track photos, section drawing reference and nearby size support.
750X150X66750X150Rubber TrackRubber Tracks
Rubber Track Fitment
Rubber Track Fitment Size Database
Search by machine brand, model or rubber track size to find matching track specifications.
Quick Index
Size：750X150X66
Popular Brands
All Brands
A
B
C
D
E
F
G
H
M
MACELROY (1)MACMOTER (15)MADRO (2)MAEDA (1)MAIT (1)MANITOU (1)MASSEY FERGUSON (3)MAWECO (7)MAXIMA (5)MBU (3)MECALAC (7)MECBO (1)MECC. BENASSI (3)MENZI MUCK (3)MERLO (13)MERTZ (2)MESSERSI (36)MINICARRIER (6)MINICRUSHER (1)MINIDIG (2)MINIMUSTANG (1)MINITRACK (2)MIRA (1)MITSUBISHI (4)MORATH (1)MOROOKA (35)MORRISH (1)MULTIDRILL (1)MULTITEL (5)
N
P
R
S
T
5 matching records, page 1 / 1
1 pages total · Static local fitment index
Inquiry
FIAT HITACHI
CG110
- Original Size
- 750X150X66
- Rubber Track Size
- 750X150X66
- Rollers
- A2
- Alternative Size
- -
IHI
IC100
- Original Size
- 750X150X66
- Rubber Track Size
- 750X150X66
- Rollers
- A2
- Alternative Size
- -
MOROOKA
MST2200
- Original Size
- 750X150X66
- Rubber Track Size
- 750X150X66
- Rollers
- A2
- Alternative Size
- -
MOROOKA
MST2300
- Original Size
- 750X150X66
- Rubber Track Size
- 750X150X66
- Rollers
- A2
- Alternative Size
- -
SEO Size Detail
750X150X66 replacement rubber track reference
Track Width
750 mm
Pitch
150 mm
Links
66
Understanding the Dimension Parameters
The track width (750 mm) determines ground contact area and flotation. A wider track distributes machine weight more evenly, which helps on soft or muddy ground. Matching width to machine spec is important for stability and undercarriage clearance.
The pitch (150 mm) is the distance between two adjacent drive lugs. It must match the drive sprocket tooth spacing exactly — even a 1 mm mismatch causes accelerated sprocket and lug wear. When replacing tracks, confirm 150 mm pitch with the existing sprocket before ordering.
The link count (66) sets the total track circumference. A higher link count on the same width and pitch means a longer track for larger machines. Always verify link count against the original track marking or machine manual.
750X150X66 rubber track photos
Photos are matched by full width, pitch and link count. Nearby references are shown when the exact photo is not available.
750X150 rubber track section drawing
Section drawings are matched by width and pitch because they do not include link count.
Application Scenarios
Agricultural Machinery
Rubber tracks for harvesters, compact tractors and muddy field conditions.
Construction Equipment
Excavators, mini diggers and compact loaders that need stable grip and wear resistance.
Special Vehicles
Tracked carriers and special-purpose machines that need replacement size references.
Maintenance and Replacement
Useful for wear diagnosis, model matching and old-track replacement planning.
Nearby Size Comparison
Compare 750X150X66 with nearby specifications that share the same width or pitch. Check size pages for exact machine fitments, photos and section drawings before final selection.
Same Pitch (150 mm)
Matched Machine Fitments
Brand
ALLTRACK
Model
AT2200
Original Size
750X150X66
Rollers
A2
Brand
FIAT HITACHI
Model
CG110
Original Size
750X150X66
Rollers
A2
Brand
IHI
Model
IC100
Original Size
750X150X66
Rollers
A2
Brand
MOROOKA
Model
MST2200
Original Size
750X150X66
Rollers
A2
Brand
MOROOKA
Model
MST2300
Original Size
750X150X66
Rollers
A2
Installation & Tensioning Notes
Track Tension Check
For 750X150X66 rubber tracks, sag should be 10–15 mm when measured mid-span under light hand pressure. Over-tensioning accelerates wear on drive lugs, sprockets and idlers.
Installation Alignment
Check that the drive sprocket, idler and roller alignment is within tolerance before mounting. Misalignment causes uneven edge wear and shortens track life regardless of size.
Replacement Interval Reference
Typical replacement cycles for 750X150X66 depend on operating hours, ground conditions and tension maintenance. Inspect track surface, steel core exposure and link cracking at 500-hour intervals.
Technical Articles
Rubber Tracks
How to Read Rubber Track Size 180X60X30
A practical guide to reading 180X60X30 rubber track size markings, including width, pitch, link count, fitment checks and inquiry information.
Rubber Tracks
Rubber Track Pitch and Link Count Explained
Understand rubber track pitch, link count and width, and why section drawings match width and pitch while photos match the full size.
Rubber Tracks
Rubber Track Tension Guide
A practical rubber track tension guide covering over-tight, loose and uneven wear symptoms for excavators, carriers and agricultural machines.
Industry Applications
Rubber in Agricultural Machinery: Tracks, Seals & Vibration Systems
Comprehensive guide to rubber products in agricultural machinery: harvester tracks (NR/SBR formulation), planter seed tubes, sprayer seals (EPDM/NBR/CR), and tractor damping systems. Material selection for wide-temperature operation (-30 to +50 deg C) and fertilizer/pesticide chemical resistance.
FAQ
What does 750X150X66 mean on a rubber track?
750X150X66 uses 750 mm track width and 150 mm pitch with 66 links. Photos are matched by full size, while section drawings are matched by width and pitch.
Which machines use 750X150X66 rubber tracks?
750X150X66 uses 750 mm track width and 150 mm pitch with 66 links. Photos are matched by full size, while section drawings are matched by width and pitch.
Can 750X150X66 rubber tracks be customized?
750X150X66 uses 750 mm track width and 150 mm pitch with 66 links. Photos are matched by full size, while section drawings are matched by width and pitch.
Inquiry for 750X150X66 Rubber Track
Send the machine brand, model, old track side marking, photos and quantity so the track pattern, core bar and delivery plan can be checked.
Send InquiryInquiry
Request Product and Material Support
Share your product type, material requirements, dimensions, quantity and working conditions. The platform can help organize the next technical discussion.
Product type or drawing
Material and hardness
Working condition
Quantity and schedule