Rubber Tracks
Rubber Track Pitch and Link Count Explained
Understand rubber track pitch, link count and width, and why section drawings match width and pitch while photos match the full size.
Article Info
- Category
- Rubber Tracks
- Tags
- Rubber TrackTrack PitchTrack LinksSection Drawing
- Keywords
- rubber track pitch / rubber track links / rubber track section drawing / Nanjing Yuhang Rubber
Expertise Signal
- Technical review
- YuHang Rubber Technical Team
- Review Role
- Industrial Rubber Product Technical Review
- Known For
- Rubber FenderRubber TrackRubber SheetRubber HoseRubber ExtrusionCustom Rubber Parts
Industrial rubber product manufacturer covering rubber fenders, rubber tracks, rubber sheets, rubber hoses, extrusions, belts and custom molded rubber parts.
Rubber Track Pitch and Link Count Explained
Rubber track sizes are commonly written as width, pitch and link count, for example 180X60X30. Width affects ground contact and clearance, pitch controls sprocket engagement, and link count determines total track length.
This distinction is important on the rubber track size pages. A full track photo is matched by the full size, such as 180X60X30. A section drawing is matched by width and pitch, such as 180X60, because the drawing shows one repeated section rather than the final loop length.
Pitch
Pitch is the distance between repeated guide or core positions. If the pitch does not match the sprocket, the track may jump teeth, make abnormal noise or wear the inner guide quickly.
Link Count
Link count is the number of repeated sections in the complete track. It controls total length and tension range. A track with the same width and pitch but a different link count may still be unsuitable for the machine.
| Parameter | Main Question | Risk If Wrong |
|---|---|---|
| Width | Does it fit the frame and ground pressure target? | Interference or poor stability |
| Pitch | Does it match the sprocket? | Tooth jumping and inner wear |
| Links | Does it match undercarriage length? | Cannot install or cannot tension |
FAQ
Can tracks with the same width and pitch share a section drawing?
They can often use the same section drawing as a structural reference, but the complete replacement track still depends on link count and machine fitment.
Can pitch be measured on site?
Yes, but worn tracks may introduce error. Side markings, sprocket photos and machine model information should be checked together.
Can Nanjing Yuhang Rubber confirm by sample photos?
Yes. Old track photos, markings, dimensions, machine details and quantity help confirm the replacement rubber track.
FAQ
Can this article be used as the final selection basis?
It is intended for preliminary technical review. Final material or product selection should be confirmed with the actual medium, temperature, load, dimensions, drawings and sample testing when needed.
What information should be provided for an inquiry?
Please provide the application equipment, working medium, temperature range, dimensions, quantity, drawing or sample information so the technical discussion can be organized faster.